收錄情況：

期刊榮譽：

原始論文、短文快報、綜合評述

Corrosion Behavior of Fe–Al Coatings Fabricated by Pack Aluminizing Method

Non-isothermal Dissolution Modelling of Sigma Phase in Duplex Stainless Steels

Observation of Bi Coarsening and Dissolution Behaviors in Melting Al–Bi Immiscible Alloy

Electrochemical Characteristics in Seawater for Cold Thermal Spray-Coated Al-Mg Alloy Layer

Analysis of Oxides Formed on the Surface of the Alloy 690 in Hydrogenated Supercritical Water

Characterization of the Grain Structures in Vacuum-Assist HighPressure Die Casting AM60B Alloy

Electrodeposited Ni-Based Coatings Subject to Nano-enhanced Lubricant and Composite Coating

Effects of Zr Content on the Microstructures and Tensile Properties of Ti-3Al-8V-6Cr-4Mo-xZr Alloys

Microstructure, Residual Strain and Stress Corrosion Cracking Behavior in 316L Heat-Affected Zone

Effect of Nb Content on Solidification Characteristics and Microsegregation in Cast Ti-48Al-xNb Alloys

Processing, Microstructure and Mechanical Properties of Ti6Al4V Particles-Reinforced Mg Matrix Composites

Thermal and Mechanical Properties of Graphene-Titanium Composites Synthesized by Microwave Sintering

Grain Refining Efficiency of SHS Al-Ti-B-C Master Alloy for Pure Aluminum and Its Effect on Mechanical Properties

Characteristics of the Structure and Properties of ZnSnO_3 Films by Varying the Magnetron Sputtering Parameters

A Comparison Study of Wear and Fretting Fatigue Behavior Between Cr-alloyed Layer and Cr-Ti Solid-solution Layer

Effect of Ambient Temperature on the Electrochemical Properties of La_4MgNi_(17.5)Co_(1.5) Hydrogen Storage Alloy

Fabrication of Bulk (Fe,Cr)_3Al/Al_2O_3 Intermetallic Matrix Nanocomposite Through Mechanical Alloying and Sintering

Effect of Nb and Mo on the Microstructure, Mechanical Properties and Ductility-Dip Cracking of Ni–Cr–Fe Weld Metals

Effects of W and Mo Additions on Wet-dry Acid Corrosion Behavior of Low-Alloy Steels Under Different O_2 Concentrations

Impact of Friction Stir Welding (FSW) Process Parameters on Thermal Modeling and Heat Generation of Aluminum Alloy Joints

Influence of Alloying Element Addition on Cu–Al–Ni High-Temperature Shape Memory Alloy without Second Phase Formation

Microstructure and Electrochemical Corrosion Behavior of Fe-Cr System Alloys as Substitutes for Ni-Based Brazing Filler Metal

A Composite Photoanode Based on P25/TiO_2 Nanotube Arrays/Flower-Like TiO_2for High-Efficiency Dye-Sensitized Solar Cells

Mechanical Properties and Microstructure Evolution of AA1100 Aluminum Sheet Processed by Accumulative Press Bonding Process

Effects of Substrate Crystallographic Orientations on Microstructure in Laser Surface-Melted Single-Crystal Superalloy:Theoretical Analysis

Microscopic Phase-Field Simulation for the Influence of Interatomic Potential on the Precipitation Process of Ni_(75)Al_(14)Mo_(11) Alloy

Electrochemical Properties of Tungsten-Alloying-Modified AISI 430 Stainless Steel as Bipolar Plates for PEMFCs used in Marine Environment

Influences of Hot-Isostatic-Pressing Temperature on the Microstructure, Tensile Properties and Tensile Fracture Mode of 2A12 Powder Compact

Comparative Study of the Magnetic Properties and Glass-Forming Ability of Fe-Based Bulk Metallic Glass with Minor Mn, Co, Ni, and Cu Additions

Microstructure and Properties of 7075Al Alloy Fabricated by Directly Combined of Spray Forming and Continuous Extrusion Forming under Different Atomization Gas Pressures

1、文章標題要簡短，能概括中心思想，一般不超過20個漢字，必要時加副標題

2、正文應層次清楚，行文規范，方便閱讀，字?jǐn)?shù)一般以2500-8000字為宜，重要稿件可不受此限制

3、題目下面均應寫作者姓名、單位名稱、所在城市、郵編，多位作者分別列出上述信息

4、來稿必須附有100-300字的內容摘要和3－5個關鍵詞

5、如文章獲得基金項目資助，以[基金項目]作為標識，并注明基金項目名稱和編號

6、正文中圖表主要是文字難以表達清楚的內容，圖表應設計合理，先后分別給出圖表序號

7、來稿請注明姓名、性別、籍貫、出生年月、學歷、職稱、工作單位、聯系電話、詳細郵寄地址

8、編輯部有權對稿件進行修刪，不同意請?jiān)诟寮新暶?/p>

9、請勿一稿多投，發現一稿多投者，一切不良后果由作者承擔

10、若不能被錄用，恕不退稿，請作者自留底稿，不同意上述稿件處理方式的作者請轉投他刊

11、本站并非Acta Metallurgica Sinica雜志社和Acta Metallurgica Sinica編輯部官方網站

地  址：72 Wenhua Road, Shenyang 110016, China

郵政編碼：100711