《Journal of Wuhan University of Technology(Materials Science Edition)》本刊是國家教育部主客的材料科學類學術類英文版。主要刊載有關材料科學包括無機非金屬材料、有機高分子材料、金屬材料的最新科研成果的學術論文及該領域研究的新進展、新工藝等具有重要學術價值和實用價值的論文。
《Journal of Wuhan University of Technology(Materials Science Edition)》1996起至今為中國大陸三家以高校命名進入SCI的學報之一，且論文近100%被SCI和EI收錄。自1996年起進入EI、CA千名表，并進入CBST、ΡЖ。本刊1999年受到中國科協和國家自然科學基金聯合頒發的重點扶持性資助，被中國科技論文統計源期刊，中國科學引文數據庫來源期刊，中國學術期刊綜合評價數據庫來源期刊，中國期刊網和萬方數據網源刊等收錄。
CSCD 中國科學引文數據庫來源期刊(含擴展版)、 統計源期刊(中國科技論文優秀期刊)、 知網收錄(中)、 維普收錄(中)、 萬方收錄(中)、 EI 工程索引(美)、 CA 化學文摘(美)、 SCI 科學引文索引(美)、 JST 日本科學技術振興機構數據庫(日)、 Pж(AJ) 文摘雜志(俄)、 國家圖書館館藏、 上海圖書館館藏、 文摘雜志、
納米材料、生物材料、新型材料的制備及工藝技術應用、材料生產的利廢及節能、國內外材料發展的動向、其他
Initiation of Single-part Epoxy in Cementitious System-Ⅱ
Corrosion Mechanism and Corrosion Model of Mg-Y Alloy in NaCl Solution
Effect of Ga_2O_3 on Structure and Properties of Calcium Aluminate Glasses
Effect of Delay Released Welan Gum on the Performance of Cement Mortar
Effects of Carbonation and Freeze-thaw Cycles on Microstructure of Concrete
Corrosion Resistance of AZ91 Magnesium Alloy after Laser Remelting Treatment
Synthesis and Properties of Li_2MnSiO_4/C Cathode Materials for Li-ion Batteries
The Chloride Permeability of Persulphated Phosphogypsum-Slag Cement Concrete
Dielectric Properties of Bi_4Ti_3O_(12) Ceramics by Impedance Spectroscopic Method
AFM Analysis of TiN, TiAlN, and TiAlSiN Coatings Prepared by Cathodic Arc Ion Plating
Effect of Ca Addition and Heat Treatment on the A390(S)/AM60(L) Interface Microstructure
Effect of Corrosive Solutions on C-S-H Microstructure in Portland Cement Paste with Fly Ash
Influence of Curing Duration on Thaumasite Formation of Portland-limestone Cement Pastes
Preparation and Arc Erosion Characteristics of Ultrafine Crystalline CuCr50 Alloy by MA-SPS
Analysis of Microstructure and Mechanical Properties of Ultrafine Grained Low Carbon Steel
Fabrication of Al_2O_3-NaCl Composite Heat Storage Materials by One-step Synthesis Method
Molecular Dynamics Simulation on Pressure and Thickness Dependent Density of Squalane Film
Microstructure and Wear Behavior of Ti-6Al-4V Treated by Plasma Zr-alloying and Plasma Nitriding
Preparation of Diphenylcarbazide-Directed Cd Se Quantum Dots and Selective Determination for Cr(Ⅵ)
Mechanical Properties and Microstructure of Portland Cement Concrete Prepared with Coral Reef Sand
Effects of Ultrasonic Treatment on Microstructure and Mechanical Properties of Semisolid Sn-52Bi Alloy
Hydration Process and Crack Tendency of Concrete Based on Resistivity and Restrained Shrinkage Crack
Simulation of the Cracking and Ablation Behavior of Ferrosiliceous and Siliceous Nuclear Sacrificial Concretes
Synthesis and Tribological Properties of Copper-alumina Nanocomposites Prepared by Coprecipitation Technique
Effect of Thermal Shock Process in Accelerated Environment Spectrum on the Fatigue Life of 7B04-T6 Aluminum Alloy
Effects of Pouring Temperature on Interfacial Reaction between Ti-47.5Al-2.5V-1Cr Alloy and Mold during Centrifugal Casting
Numerical Simulation on Interfacial Creep Failure of Dissimilar Metal Welded Joint between HR3C and T91 Heat-Resistant Steel
Effect of Pore Structures on the Electrochemical Performance of Porous Silicon Synthesized from Magnesiothermic Reduction of Biosilica
Effect of Stirring Velocity in Micro Fused-Casting for Metal on Microstructure and Mechanical Properties of A356 Aluminum Alloy Slurry
Performance Degradation of the Repeated Recycled Aggregate Concrete with 70% Replacement of Three-generation Recycled Coarse Aggregate
1、文章標題要簡短，能概括中心思想，一般不超過20個漢字，必要時加副標題
2、正文應層次清楚，行文規范，方便閱讀，字數一般以2500-8000字為宜，重要稿件可不受此限制
3、題目下面均應寫作者姓名、單位名稱、所在城市、郵編，多位作者分別列出上述信息
4、來稿必須附有100-300字的內容摘要和3－5個關鍵詞
5、如文章獲得基金項目資助，以[基金項目]作為標識，并注明基金項目名稱和編號
6、正文中圖表主要是文字難以表達清楚的內容，圖表應設計合理，先后分別給出圖表序號
7、來稿請注明姓名、性別、籍貫、出生年月、學歷、職稱、工作單位、聯系電話、詳細郵寄地址
8、編輯部有權對稿件進行修刪，不同意請在稿件中聲明
9、請勿一稿多投，發現一稿多投者，一切不良后果由作者承擔
10、若不能被錄用，恕不退稿，請作者自留底稿，不同意上述稿件處理方式的作者請轉投他刊
11、本站并非Journal of Wuhan University of Technology雜志社和Journal of Wuhan University of Technology編輯部官方網站
地 址：武漢武昌珞獅路122號
郵政編碼：430070
若用戶需要出版服務，請聯系出版商，地址：武漢武昌珞獅路122號，郵編：430070。
